crtl-i » Experiments http://crtl-i.com/blog Tue, 01 Mar 2011 08:16:15 +0000 en hourly 1 http://wordpress.org/?v=3.0.4 Cocoon http://crtl-i.com/blog/2011/03/cocoon/ http://crtl-i.com/blog/2011/03/cocoon/#comments Tue, 01 Mar 2011 08:14:25 +0000 crtl-i http://crtl-i.com/blog/?p=639

The saturation of paradox is perhaps the wonder of contemporary society. The world has never been so strikingly contradicting. We are more globally connected, shared, and opened than ever. More spaces are locked, controlled, and surveilled than ever. We are able to communicate with the entire world within a closed room. Cities have never been so crowded. Surfacing images now redefine urban spaces as we know it. We walk in streets of unreality. More and more, we run into faceless strangers we will never see again. We have never felt so isolated. Our true emotions are less relevant. We regain a sense of the real in our dreams. Nothing is absolute. Everything is blurry. It is now difficult to grasp what’s real from what’s visible. Women are men. Men are women. The unreal has never been so real. The real has never been so unreal.

Cocoon is a house in which everything we know of a house ceases to exist. A house divides a space into smaller finite spaces of different events. Cocoon is in itself a space of infinite events. A house is situated somewhere and provides us with the sense of stability that tells us where we belong. Cocoon is nowhere and everywhere. It exudes the sense of identity. It is our body. A house is physical in that it has clear material distinctions among windows, walls, ceilings, and doors. Cocoon is both material and ethereal like light in that it has ambiguous boundaries. A house is fenced and gated in human efforts to ensure security and to protect privacy. Cocoon is a form of human desire to relate and to connect.

with Dong-wook Hwang
]]> http://crtl-i.com/blog/2011/03/cocoon/feed/ 0 in sync http://crtl-i.com/blog/2011/01/in-sync/ http://crtl-i.com/blog/2011/01/in-sync/#comments Wed, 12 Jan 2011 05:16:12 +0000 crtl-i http://crtl-i.com/blog/?p=610

http://dcreative.tistory.com/entry/in-sync-2011

]]> http://crtl-i.com/blog/2011/01/in-sync/feed/ 0 Sub-Dividing http://crtl-i.com/blog/2010/03/sub-dividing/ http://crtl-i.com/blog/2010/03/sub-dividing/#comments Thu, 25 Mar 2010 09:51:02 +0000 crtl-i http://crtl-i.com/blog/?p=545

]]> http://crtl-i.com/blog/2010/03/sub-dividing/feed/ 0 Photocell + 8×8 LED Matrix http://crtl-i.com/blog/2010/03/photocell-8x8-led-matrix/ http://crtl-i.com/blog/2010/03/photocell-8x8-led-matrix/#comments Thu, 04 Mar 2010 14:43:07 +0000 crtl-i http://crtl-i.com/blog/?p=529

This is an example of using 2 photocells and a variable resistor as analog inputs to control 8×8 LED Matrix with PIC18F452, UDN2981, and ULN2803. The input values of the two photocells are compared. When the values are the same, LED lights up randomly within the entire board. Depending on how much darker a photocell is compared to the other, LED lights up within the range that is more focused towards a corner. The variable resistor controls how fast the LEDs blink. This is how the board was set up:

The following is the code:

DEFINE LOADER_USED 1
DEFINE OSC 20
INCLUDE “modedefs.bas”

DEFINE ADC_BITS 10
DEFINE ADC_CLOCK 3
DEFINE ADC_SAMPLEUS 20

ADCON1 = %10000010

trisb =%00000000
trisd =%00000000
trisa =%11111111
trisc =%10000000

an0 var word
an1 var word
an2 var word
an0b var byte
an1b var byte
an2b var byte

portb = 0
portd = 0

rand_max var byte
rand_min var byte
random_word var word
randomdig var byte

main:

GOSUB getadc
IF an1b < an2b THEN
rand_max=an1b
rand_min=0
ENDIF

IF an1b > an2b THEN
rand_max=7
rand_min=7-an2b
ENDIF

IF an2b = an1b THEN
rand_max=7
rand_min=0
ENDIF

GOSUB generate_Random
portb = 1<<randomdig
GOSUB generate_Random
portd = 1<<randomdig
PAUSE 10*an0b
gosub bd_off
PAUSE 1*an0b

GOTO main

bd_off:
portb=0 : portd=0
RETURN

getadc:
ADCIN 0,an0
ADCIN 1,an1
ADCIN 2,an2
an0b = (an0*8)>>10
an1b = (an1*8)>>10
an2b = (an2*8)>>10
RETURN

generate_random:
RANDOM random_word
randomdig = random_word DIG 1
IF randomdig > rand_max THEN GOTO generate_random
IF randomdig < rand_min THEN GOTO generate_random
RETURN
]]> http://crtl-i.com/blog/2010/03/photocell-8x8-led-matrix/feed/ 0 Analog / Digital Input, Output http://crtl-i.com/blog/2010/02/analog-digital-input-output/ http://crtl-i.com/blog/2010/02/analog-digital-input-output/#comments Mon, 22 Feb 2010 06:14:42 +0000 crtl-i http://crtl-i.com/blog/?p=509

This is an example of using 2 variable resistors as analog inputs and a switch as a digital input to control 8 LEDs with a PIC18F452 chip. Variable resistor 1 is used to control which LEDs light up. The second variable resistor controls how fast the LEDs blink. The switch decides whether the LEDs blink or not. MAX232CPE is used to allow serial communication with a computer. PICBASIC was used to program the chip. This is how the board was set up:

The following is the code:

DEFINE LOADER_USED 1
DEFINE OSC 20
INCLUDE “modedefs.bas”

DEFINE ADC_BITS 10
DEFINE ADC_CLOCK 3
DEFINE ADC_SAMPLEUS 20

ADCON1 = %10000010

TRISA = %11111111
TRISB = %00000000
TRISC = %10001000

adc VAR WORD
adcbyte VAR BYTE

SPEED VAR WORD
SPEEDbyte VAR BYTE

SWITCH VAR PORTC.4

main:

IF SWITCH = 1 THEN

ADCIN 0, adc
adcbyte = adc/140

ADCIN 1, SPEED
SPEEDbyte = SPEED/140

PORTB = %00000001 << adcbyte
PAUSE 100*SPEEDbyte
PORTB = 0
PAUSE 100*SPEEDbyte

ELSE
ADCIN 0, adc
adcbyte = adc/140

PORTB = %00000001 << adcbyte

ENDIF

GOTO main

]]> http://crtl-i.com/blog/2010/02/analog-digital-input-output/feed/ 2 Catenary – Maya nCloth http://crtl-i.com/blog/2010/02/catenary-maya-ncloth/ http://crtl-i.com/blog/2010/02/catenary-maya-ncloth/#comments Tue, 16 Feb 2010 10:02:55 +0000 crtl-i http://crtl-i.com/blog/?p=505 Karey (http://kareydarnellhelms.com) showed me a great catenary / structural analysis tool being developed in grasshopper (http://spacesymmetrystructure.wordpress.com/2010/01/21/kangaroo/). Similar ideas can be explored using the nCloth tool in Maya. This is what it looks like.

]]> http://crtl-i.com/blog/2010/02/catenary-maya-ncloth/feed/ 0 8×8 LED Matrix http://crtl-i.com/blog/2010/01/8x8-led-matrix/ http://crtl-i.com/blog/2010/01/8x8-led-matrix/#comments Fri, 29 Jan 2010 07:38:10 +0000 crtl-i http://crtl-i.com/blog/?p=480

Front side

Cathode rows soldered

Anode rows soldered

]]> http://crtl-i.com/blog/2010/01/8x8-led-matrix/feed/ 0 Physical Computing – Current Amplification http://crtl-i.com/blog/2010/01/physical-computing-i/ http://crtl-i.com/blog/2010/01/physical-computing-i/#comments Sat, 23 Jan 2010 15:00:24 +0000 crtl-i http://crtl-i.com/blog/?p=466

Today was my first day at a physical computing workshop run by Jin-Yo Mok (http://www.geneo.net). I’m starting from the very basics to understand how every single piece operates at the most fundamental level. The breadboard in the image shows the simplest setup of current amplification using an NPN transistor (2N2222).  Hopefully, I’ll be able to design custom circuit boards in the future as I become more comfortable with all these volts and currents :)

]]> http://crtl-i.com/blog/2010/01/physical-computing-i/feed/ 1 Fibrous Art Bridge http://crtl-i.com/blog/2010/01/fibrous-art-bridge/ http://crtl-i.com/blog/2010/01/fibrous-art-bridge/#comments Thu, 21 Jan 2010 13:41:07 +0000 crtl-i http://crtl-i.com/blog/?p=459

These are some images from a recently finished competition.

]]> http://crtl-i.com/blog/2010/01/fibrous-art-bridge/feed/ 0 Fibers 2 http://crtl-i.com/blog/2010/01/fibers-2/ http://crtl-i.com/blog/2010/01/fibers-2/#comments Mon, 04 Jan 2010 16:04:24 +0000 crtl-i http://crtl-i.com/blog/?p=452

Ordered, but random
Random, but ordered

]]> http://crtl-i.com/blog/2010/01/fibers-2/feed/ 0